Solution Blow Spinning of Piezoelectric Nanofiber Mat for Detecting Mechanical and Acoustic Signals

Eman Elnabawy, Mazen Farag, Amira Soliman, Kamal Mahmoud, Nader Shehata, Remya Nair, Ishac Kandas, Aatif Rasheed, Madeleine Combrinck, Jibran Khaliq, Islam Shyha, Ali Kilic, Ahmed Hassanin*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

4 Citations (Scopus)
4 Downloads (Pure)


Solution blow spinning (SBS) technique can produce nanofibers (NFs) mat in large scale production. In this work, the SBS was used to fabricate piezoelectric polyvinylidene fluoride (PVDF) nanofiber membranes that can be utilized for energy harvesting applications. The effect of operating air pressure from (2-5 bar) on the surface morphology of the NFs has been studied. The structural analysis for crystalline polymorph β-phase for PVDF powder, casted film, electrospinning and SBS NFs has also been presented with the aid of Fourier-transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Piezoelectric characteristics of PVDF NFs mats were tested by applying impact impulse with different weights from different heights between 1 cm and 10 cm. The sensitivity of the voltage response increased from 1.71 mV/g to 8.98 mV/g respectively. Besides, the SBS generated PVDF mat is found to be sensitive to pressure forces in a range of few Newtons with the generated voltage according to detected sensitivity of 80 mV/N with analysis of the impact of a few Hertz mechanical vibrations. In addition, the produced SBS nanofibers are applied as an acoustic signal detector within different acoustic frequencies. The results prove that the β-phase PVDF nanofibrous membrane produced via the SBS technique has a great potential to be used as a piezoelectric sensor.
Original languageEnglish
Article number51322
Number of pages10
JournalJournal of Applied Polymer Science
Issue number45
Early online date5 Jul 2021
Publication statusPublished - 5 Dec 2021


Dive into the research topics of 'Solution Blow Spinning of Piezoelectric Nanofiber Mat for Detecting Mechanical and Acoustic Signals'. Together they form a unique fingerprint.

Cite this